Safety Signs - Car-O-Liner CTR9 Instruction Manual

CTR9
2.3

Safety signs

49023, EN - rev. 4, 2020-01
Undamaged safety signs shall always be attached at the indicated places (see
section 2.3.1 "Placement of safety signs"). If any signs are damaged or miss-
ing, the user is responsible for their immediate replacement. The following
safety signs can be found on the welder unit and C-Tong:
WARNING!
Risk of tripping on loose hoses, etc. (Art no. 99786)
WARNING!
All electrical connections must be made by a qualified electrician.
Disconnect the supply before performing any service or installation work.
(Art no. 43720)
WARNING!
Appropriate protection (protective gloves, visor, clothing and shoes) must be
worn when using this equipment. (Art no. 46002)
WARNING!
Risk of crushing (moving electrodes), risk of burning, electromagnetic field
may damage pacemaker, watches, magnetic strip cards and magnetic data
carriers. (Art no. 48913)
WARNING!
Maximum air pressure 10 bar (145 PSI). Recommended air pressure
between 5 bar (73 PSI) and 10 bar (145 PSI). (Art no. 43712)
Car-O-Liner Group AB
17