Car-O-Liner CTR9 Instruction Manual page 2

Car-O-Liner Group AB
Foreword
The spot welder CTR9 is used by body shops to
duplicate the welding procedure used by the car
manufacturers. All other use of the equipment, or use
which is contrary to the instructions given in this manual,
can cause personal injury and/or machine damage.
Car-O-Liner can in no way be held responsible for
intentional or unintentional damage, and consequent
unlimited loss of profit, loss of income, loss of business
opportunity, loss of use or other similar nuisance,
irrespective of how this has arisen, that originates from
incorrect use of this equipment or its use in a manner not
intended.
Warranty
Car-O-Liner offers a one-year guarantee from the date of
delivery. This guarantee covers material defects and
assumes normal care and maintenance.
The guarantee assumes that:
- the equipment is correctly installed and inspected in
accordance with current local regulations.
- the equipment has not been altered or rebuilt without
approval from Car-O-Liner.
- genuine Car-O-Liner spare parts are used in any
repairs.
- operation and maintenance has been carried out
according to the instructions in this manual.
All claims on warranty must verify that the fault has
occurred within the guarantee period, plus that the unit
has been used within its operating range as stated in the
specifications. All claims must include the product,
article number and serial number. This data is to be
found stamped on the name plate, see section 1.3
Marking for location.
Note
This instruction manual gives advice as well as
instructions for installation, operation, maintenance and
trouble shooting.
Copyright (c) Car-O-Liner Group AB 2019.
Car-O-Liner © (2019) is a trademark of Snap-on Incorporated. All rights reserved.
2
IMPORTANT! Read this manual carefully to become
familiar with the proper operation of the spot welder
CTR9. It is recommended that you use your authorized
Car-O-Liner Distributor for maintaining and servicing
your products. Never perform repairs, adjustments or any
other work on the products which may result in personal
injury and damage to the product.
Your Car-O-Liner Distributor employs factory trained
technicians and is focused on offering you the best over-
all experience with your new Car-O-Liner product. Addi-
tionally your authorized Car-O-Liner Distributor is pre-
pared to make sure that any revisions or upgrades, as
required by Car-O-Liner, will be performed on your
product.
The photographs and drawings in this manual are
intended only to be illustrative and do not necessarily
show the design of the equipment available on the
market at any given time. The equipment is intended for
use in accordance with current trade practice and
appropriate safety regulations. The equipment illustrated
in the manual may be changed without prior notice.
The contents in this publication can be changed without
prior notice.
This publication contains information which is protected
by copyright laws. No part of this publication may be
reproduced, stored in a system for information retrieval
or be transmitted in any form, in any manner, without
Car-O-Liner's written consent.
Conformity with directives and
standards
The spot welder CTR9 is designed and manufactured by
Car-O-Liner Group AB.
The spot welder CTR9 complies with relevant standards
and directives. Only Car-O-Liner approved equipment
and spare parts may be used together with the the spot
welder CTR9.
Any alterations not approved by Car-O-Liner renders the
certifications issued by Car-O-Liner invalid.
CTR9
49023, EN - rev. 4, 2020-01