Changing And Aligning The A-Tong Electrodes - Car-O-Liner CTR9 Instruction Manual

Car-O-Liner Group AB CTR9

4.5.5 Changing and aligning the A-Tong electrodes

Change the A-Tong electrodes by following the instructions below:
1. Release the two locking screws and detach the electrode.
IMPORTANT! After electrodes are changed they must be aligned to
maintain optimal performance.
2. Align the electrodes (lockings screws released)
by adjusting them in height and for rotation.
62
49023, EN - rev. 4, 2020-01