Car-O-Liner CTR9 Instruction Manual page 115

CTR9
10.4 460V
CTR9 Spot Welder 460V
Rated input voltage, U
1N:
Power supply fuse
Protection type:
Insulation class:
Cooling type:
Compressed air supply, p1min auto - p1max:
Duty factor, X:
Maximum short circuit input current, ILCC:
Permanent power (100 % duty factor), Sp:
Permanent input current, ILp:
Welding Output
Maximum short circuit output current, I2cc:
Permanent output current (100 % duty factor), I2p:
No-load voltage, U2d:
Liquid Cooling
Cooling power:
Tank capacity:
Rated cooling liquid flow, Q:
Cooling liquid pressure drop,
Mechanical Data
Electrode force, Fmin-Fmax:
Dimensions (HxWxD) approx. (without support arm):
Weight approximately (with support arm, 20 l water and 80 mm yoke):
Weight C-Tong, with 80 mm yoke, approximately:
Cable length:
49023, EN - rev. 4, 2020-01
D
p:
Table 10.4 Technical specifications for CTR9 460V welding machine
Car-O-Liner Group AB
3 x 460V -5% +10%, 50 Hz-60 Hz
30A slow blow or circuit breaker Type K
IP21
F
Liquid cooled
5.0-10 bar (72-145 psi)
10%
109 A
128 kVA
161 A
16.0 kA
15.8 kA
14.5 V
1000W
20 l (5.3 gal)
3 l/min (0.79 gal/min)
1.79 bar (26.0 psi)
350-640 daN (787-1439 lbf)
1130 x 650 x 930 mm (44.5 x 25.5 x 36.5 in)
135 kg (298 lbs)
11,4 kg (25.2 lbs)
6 m (19.7 ft)
115