Safety; Correct Use; Staff Selection And Qualification; Organisational Safety Measures - Kessel Comfort Instructions For Installation, Operation And Maintenance

For pumpfix / ecolift
Hide thumbs Also See for Comfort:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 29
2

Safety

2.1

Correct use

The control unit may only be used to control backwater valves of the type FKA for wastewater with or without
sewage. The control unit must not be used in a potentially explosive environment.
Any
conversions or attachments
use of non-genuine spare parts
carrying out of repairs by companies or persons not approved by the manufacturer
which has been carried out without the express and written permission of the manufacturer can lead to a loss of
warranty.
* Taking into account national requirements on explosion protection (ATEX).
2.2

Staff selection and qualification

People who operate and/or install the control unit must
be at least 18 years old.
have been sufficiently trained for the respective tasks.
be familiar with and follow the respective technical rules and safety regulations.
The owner-operator decides on the required qualifications for the
operating staff
maintenance staff
repair staff
The owner-operator must ensure that only qualified staff work on the control unit. Qualified staff are members
of staff who, on the basis of their training and experience as well as their knowledge of the relevant instructions,
valid standards and accident prevention regulations, can carry out the required tasks and both recognise and
avoid any possible hazards.
Work on electrical components may only be carried out by specially trained specialist staff and under adherence
to all the valid accident prevention regulations (UVV).
2.3

Organisational safety measures

The operating and maintenance instructions must always be kept available at the control unit.
2.4

Risks caused by the product

Risk caused by electric current and cables
All live components must be protected against unintentional contact. Before housing covers, plugs and cables are
opened they must be switched voltage-free. Work on electrical components may only be carried out by specialist (2.2).
36 / 168
2019/04

Advertisement

Table of Contents
loading

Table of Contents