Operating Menu - Kessel Comfort Instructions For Installation, Operation And Maintenance

Opening the backwater flap in the manual mode
Only possible if the backwater flap has been closed in the manual mode and there is no backwater (backwater
flap LED <22> is on).
• Press the backwater flap key <25>, the backwater flap is moved from the CLOSED to the OPEN position.
The backwater flap LED <22> flashes during the change of position. The backwater flap is open when the
backwater flap LED <22> goes out and the display shows "Flap open".
5.6

Operating menu

The number <24> of the respective menu level is shown as a
figure in the top line on the display.
Opening the menu
• Press the OK key <69>, menu 1 appears*
Control panel
Select from menu levels and selection lists: cursor keys.
Setting values: Select with the OK key, set with the cursor keys, confirm the setting with the OK key.
Save: You will be asked if you want to save the settings after every dialogue, OK = save, ESC = abort.
Functions of the keys
65
ESC
66 Cursor up
67 Cursor
down
69
OK
Password protection
Various settings are protected against accidental changes by a password. The password is 1000.
– Deleting an entry
– Move cursor one position to the left
– One level higher in a menu
Scrolling in the menu
Changing a set value
– Confirm/select an input/menu item
– Move cursor one position to the right
48 / 168
24
Datum
Uhrzeit
Rückstau:
Klappe:
Niveau:
Pumpe:
Fig. [21]
65 66 67
ESC
Fig. [22]
12.01.17
14:22:35
ja
geschlossen
aus
aus
69
OK
2019/04