Safety; Intended Use; Personnel Selection And Qualification; Organisational Safety Measures - Kessel Staufix Instructions For Installation, Operation And Maintenance

3

Safety

3.1

Intended use

The backwater valve is designed exclusively for installation in pipes for wastewater without
sewage.
Any
• modifications or attachments
• use of non-genuine spare parts
• carrying out of repairs by companies or persons not
authorised by the manufacturer
• use under conditions other than those required in the current guidelines and standards
without the express and written approval of the manufacturer can lead to a loss of warranty.
3.2

Personnel selection and qualification

Persons who install the backwater valve must
– be at least 18 years old.
– have been sufficiently trained and be sufficiently qualified for the respective tasks.
– be familiar with and follow the relevant technical rules and safety regulations.
Qualified personnel are persons who, on the basis of their training and experience as well
as their knowledge of the relevant provisions, current standards and accident prevention
regulations, can carry out the required tasks and both recognise and avoid any possible
hazards.
Work on electrical components may only be carried out by appropriately trained skilled
personnel and in compliance with all relevant accident prevention regulations (UVV).
3.3

Organisational safety measures

The operating and maintenance instructions must be kept available at all times.
2019/07
Safety
18 / 72 016-052