Install The Hydraulic Drive Unit (Hdu); Install The Hdu Harness - Raven RS1 Guidance And Steering Installation Manual

C 5
HAPTER
FIGURE 3. RS1 Unit Installed on Cab Roof
3. Insert the tab of the RS1 latch mounting bracket into the slotted tab of the receiver mounting bracket to
interlock the brackets.
4. Secure the RS1 mounting bracket to the latch mounting bracket by securing the latch.
NOTE: It may be necessary to adjust the latch in order to secure the RS1 unit.

INSTALL THE HYDRAULIC DRIVE UNIT (HDU)

INSTALL THE HDU HARNESS

FIGURE 4. Access Panel to be Removed
1. Locate and remove the wall panel behind the operator's seat.
2. Located the unused bulkhead connection on the rear of the cab, and remove the covering.
22
Case IH Trident 5550 - Non-Steer Ready, Raven RS1™ HDU Guidance and Steering Installation Manual