Install Fittings On The Flow Switch; Mount The Raven Steering Valve - Raven RS1 Guidance And Steering Installation Manual

INSTALL FITTINGS ON THE FLOW SWITCH

FIGURE 2. Fittings Installed on the Flow Switch
1. Install a -6 ORFS (M) to -6 SAE O-ring (M) straight adapter fitting (P/N 333-0012-084) in Ports A3 and B3 of the
flow switch (P/N 334-003-085).
2. Install the pressure transducers in Ports A2 and B2 of the flow switch.

MOUNT THE RAVEN STEERING VALVE

FIGURE 3. Mounting Location
1. Remove the bolts used to secure the machine's radar bracket (beneath the cab).
P/N 016-5032-121 Rev. A
Hydraulic System Installation: Install Fittings on the Flow Switch
15