C
3
HAPTER
INSTALL FITTINGS IN THE HYDRAULIC STEERING VALVE
Before mounting the hydraulic steering valve (P/N 334-0003-090) on the machine, install the proper fittings in the
valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.
Refer to the following table to install the fittings in the appropriate ports of the hydraulic steering valve.
FIGURE 1. Fittings Installed in Hydraulic Steering Valve
Port "B"
TABLE 1. Steering Valve Fitting Installation
Fitting - -10 SAE O-Ring (M) to -6 ORFS (M)
Fitting - -10 SAE O-Ring (M) to -8 ORFS (M)
Fitting - -10 SAE O-Ring (M) to -10 JIC (M)
14
The appearance of the TC1 hydraulic valve may
vary slightly from the images contained in this
manual. However, the fittings, hose connections,
and cable connections remain the same.
Fitting
TC1/HDU Installation Manual for Kubota M5 Series (Non-Steer Ready)
NOTICE
Part Number
333-0012-233
333-0012-304
333-0012-246
Port "A"
Port
A, B
P, T
EF