Raven RS1 Guidance And Steering Installation Manual page 32

C 5
HAPTER
1. Connect the 2-pin connector of the 115-4010-056 harness to the mating 2-pin connector of the HDU Valve
harness (P/N 115-4010-057).
2. From beneath the cab, connect the round, 31-pin connector of the valve harness (P/N 115-4010-079) to the
mating 31-pin connector of the bulkhead harness cable (P/N 115-4010-057).
FIGURE 12. VALVE Harness Cable Installation Location
3. Connect the 4-pin VALVE connector to mating connector on the RS1 hydraulic valve (P/N 334-0003-088).
FIGURE 13. PS1 and PS2 Connections
4. Install the PSI 1 and PSI 2 connectors on the pressure transducers installed in Ports A1 and B1 of the flow switch
(P/N 334-0003-085).
NOTE: The connectors can be installed in either port of the flow switch.
26
A2
Port
Case IH Trident 5550 - Non-Steer Ready, Raven RS1™ HDU Guidance and Steering Installation Manual
B2
Port