Mounting And Connecting The Hydraulic Drive Unit, Din Connector And Pressure Sensor - Raven CRX ROS-RS1 Installation Manual

STEERING SYSTEM INSTALLATION | RAVEN EUROPE KIT INSTALLATION MTZ - BELARUS
1.2.4 MOUNTING AND CONNECTING THE
HYDRAULIC DRIVE UNIT, DIN CONNECTOR
AND PRESSURE SENSOR
The Hydraulic Drive Unit bracket can be mounted to
the manifold (Figure 14). The Hydraulic Drive Unit can
then be fitted to the manifold bracket (Figure 15).
Important notes when mounting the Unit:
Mount the Hydraulic Drive Unit with
•
connectors directed downwards to prevent the
ingress of water.
Do not mount the Hydraulic Drive Unit too
•
close to parts which have a high temperature
(for example, the exhaust system of the
tractor).
Raven Industries Inc.
FIGURE 14 THE HYDRAULIC DRIVE UNIT BRACKET
MOUNTED TO THE MANIFOLD
FIGURE 15 SIDE VIEW OF THE HYDRAULIC DRIVE
UNIT TO THE MANIFOLD
PAGE 16/30 | Installation manual | 016-5035-065EN | Rev.