Install Fittings In The Smartrax Valve; Install Fittings On The Flow Switch - Raven SmarTrax Installation Manual

C 3
HAPTER

INSTALL FITTINGS IN THE SMARTRAX VALVE

Before mounting the SmarTrax valve (P/N 334-0003-088) on the machine, install the proper fittings in the valve.
This prepares the valve for installation and simplifies the hose connection process later in the procedure. Refer to
the figure and table below to install the fittings in the valve.
FIGURE 1. Fittings Installed in the SmarTrax Valve
Fitting - -6 SAE O-Ring Plug
Fitting - -4 SAE O-Ring Plug
Fitting - -6 ORFS (M) to -8 SAE O-Ring (M) Straight Adapter
Fitting - -6 ORFS (M) to -10 SAE O-Ring (M) Straight Adapter

INSTALL FITTINGS ON THE FLOW SWITCH

14 SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual
The appearance of the SmarTrax hydraulic valve
may vary slightly from the images contained in
this manual. However, the fittings, hose
connections, and cable connections remain the
same.
Fitting
NOTICE
Part Number
333-0012-104
333-0012-051
333-0012-199
333-0012-233
Port
LSPV,
LS STEER
PS
P, T
A, B