Siemens SINUMERIK 840D sl Function Manual page 1470

Detailed description
2.12 Block descriptions
Pulse diagram
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Call example
CALL FC 9 (
196
Activation of function
ASUP active
Positive acknowledgment: ASUB ended
Reset function activation after receipt of acknowledgment
Signal change using FC
Not permitted If function activation is reset prior to receipt of acknowledgment, the output
signals are not updated without the operational sequence of the activated function being
affected.
Negative acknowledgment: Error has occurred
//Start an asynchronous subprogram
//in channel 1 interrupt number 1
Start :=
ChanNo :=
IntNo :=
Active :=
Done :=
Error :=
StartErr :=
Ref :=
I 45.7,
1,
1,
M 204.0,
M204.1,
M 204.4,
M 204.5,
MW 200);
Basic logic functions: PLC basic program solution line (P3 sl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0