Siemens SINUMERIK 840D sl Function Manual page 1376

Detailed description
2.12 Block descriptions
Signal
MCP1NotSend
MCP2NotSend
MCPSDB210
MCPCopyDB77
MCPBusType
HHU
BHGIn
BHGOut
BHGStatSend
BHGStatRec
BHGInLen
BHGOutLen
BHGTimeout
BHGCycl
BHGRecGDNo
BHGRecGBZNo
BHGRecObjNo
BHGSendGDNo
BHGSendGBZNo
BHGSendObjNo
BHGMPI
102
Type Type Range of values
I BOOL
I BOOL false
I BOOL false
I BYTE
I INT 0, 5
I POINTER I0.0 to I124.0,
F0.0 to F252.0 or
DBn DBX0.0 to
DBXm.0
I POINTER Q0.0 to Q124.0,
F0.0 to F252.0 or
DBn DBX0.0 to
DBXm.0
I POINTER Q0.0 to Q124.0,
F0.0 to F252.0 or
DBn DBX0.0 to
DBXm.0
I POINTER Q0.0 to Q124.0,
F0.0 to F252.0 or
DBn DBX0.0 to
DBXm.0
I BYTE HHU default:
B#16#6 (6 Byte)
I BYTE HHU default:
B#16#14 (20 Byte)
I S5time Recommendation:
700 ms
I S5time Recommendation:
100 ms
I INT HHU default: 2
I INT HHU default: 2
I INT HHU default: 1
I INT HHU default: 2
I Int HHU default: 1
I INT HHU default: 1
I BOOL false
Remark
0: Send and receive operation
activated
1: Receive machine control panel
signals only
Available owing to compatibility
Available owing to compatibility
b#16#33: Profibus
b#16#55: Ethernet
Mixed operation possible, see
MCP/HHU configuration
Handheld unit interface
0: No HHU
5: HHU on Ethernet
Start address
PLC receive data
from HHU
Start address
PLC transmit data
to HHU
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Ethernet DIP switch
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Basic logic functions: PLC basic program solution line (P3 sl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0