Siemens SINUMERIK 840D sl Function Manual page 1132

Detailed description
2.12 Block descriptions
Parameterization:
Parameterization
Signal
PIService
Unit
WVar1
WVar2
WVar3
WVar4
WVar5
WVar6
WVar7
WVar8
148
Type Value range
ANY PI.TSEARC
INT 1, 2
INT
INT
INT
INT
INT
INT
INT 1, 2, 3
INT 0, 1, 2, 3
Meaning
Complex search using search screen forms
TOA
MagNrFrom Magazine number of magazine from which
search must begin
PlaceNrFrom Location number of location in magazine
MagNrFrom, at which search must begin
MagNrTo Magazine number of magazine at which search
must end
PlaceNrTo Location number of location in magazine
MagNrTo, at which search must end
MagNrRef Magazine number of (internal) magazine, with
reference to which the symmetrical search is to be
performed. (this parameter is only relevant with a
"symmetrical" search direction)
PlaceNrRef Location number of location in magazine
MagNrRef, with reference to which the symmetrical search
is to be performed. This parameter is only relevant with a
"symmetrical" search direction
SearchDirection specifies the required search direction.
1: Forwards from the first location of the search domain
2: Backwards from the last location of the search domain
3: Symmetrical with real magazine location positioned in
front of the location specified by MagNrRef and PlaceNrRef
KindofSearch
0: Find all tool with this property cutting edge specifically
1: Search for the first tool found with this property (cutting
edge specifically)
2: Browse all cutting edges to find all tool with this property
3: Browse all tools to search for the first tool found with this
property
Basic logic functions: PLC Basic program powerline (P3 pl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0