Siemens SINUMERIK 840D sl Function Manual page 1183

Pulse diagram
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Call example
CALL FC 9 (
Basic logic functions: PLC Basic program powerline (P3 pl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Activation of function
ASUP active
Positive acknowledgment: ASUB ended
Reset function activation after receipt of acknowledgment
Signal change using FC
Not permitted If function activation is reset prior to receipt of acknowledgment, the output
signals are not updated without the operational sequence of the activated function being
affected.
Negative acknowledgment: Error has occurred
//Start an asynchronous subprogram
//in channel 1 interrupt number 1
Start :=
ChanNo :=
IntNo :=
Active :=
Done :=
Error :=
StartErr :=
Ref :=
I 45.7,
1,
1,
M 204.0,
M204.1,
M 204.4,
M 204.5,
MW 200);
Detailed description
2.12 Block descriptions
199