Siemens SINUMERIK 840D sl Function Manual page 1063

ManualTurn
ManualTurn uses FC 30 to 35 and DB 81 to 89.
ManualTurn is an operating system for conventional, cyclecontrolled turning machines. The
above FCs and DBs can be used provided that the machine to be configured is not a turning
machine with a maximum of two axes and one spindle. If your machine is of this type and if
you might require conventional operating methods in addition to CNC functions, then you
should not use the FCs and DBs above.
ShopMill
ShopMill uses FC30 to 35 and DB 81 to 89.
ShopMill is an operating system for 2 1/2D milling machines in the workshop environment.
The above FCs and DBs can be used provided that the machine to be configured is not a
milling machine for 2 1/2D machining operations. However, if you intend to use your machine
for applications of this type, then the FCs and DBs should not be used.
2.9.3 Assignment: DB
Note
Only as many data blocks as are required according to the NC machine data configuration
are set up.
Overview of data blocks
DB no.
1
4
8
9
10
11
12
14
15
16
17
18
19
20
Basic logic functions: PLC Basic program powerline (P3 pl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Designation Name
Reserved for Siemens
PLC-MELD PLC messages
Reserved for Siemens
NC-COMPILE Interface for NC compile cycles
NC INTERFACE Central NC interface
Mode group 1 Interface mode group
Computer link and transport system interface
Reserved for Siemens
Basic program
PI Service definition
Version ID
Reserved for basic program
HMI interface
PLC machine data
Detailed description
2.9 Assignment overview
Packa
ge
BP
BP
BP
BP
BP
79