Siemens SINUMERIK 840D sl Function Manual page 1082

Detailed description
2.11 Supplementary conditions and NC VAR selector
Storing a selected list
Once variables have been selected, they can be stored under a project name. The files are
stored on a projectspecific basis.
A window is displayed for the file to be stored. The project path and name for the file must be
selected in the window.
Figure 2-28
Code generation
This menu item contains three selection options:
1. Settings (input of data block number to be generated) and other settings
2. Generate (create data block)
3. In the STEP 7 project (transferring the data block to a STEP 7 project)
Settings
Under this menu item, the DB number and the symbol for this DB number for which the code
is created is entered.
Under the "Unit System" tab, a selection is made to determine how the unit system variables
are calculated in the PLC.
Under the "Generate" tab, the project creation is defined for the relevant target system.
98
Window for project path and name of file to be stored
Basic logic functions: PLC Basic program powerline (P3 pl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0