Virtual Control Buttons Bar; Equivalence Between The Keyboard And 2000 Platform - JDS Uniphase 2000 Platform User Manual

Virtual control buttons bar

Equivalence between the keyboard and 2000 Platform

It is possible to emulate hard keys with Virtual Control buttons. This
virtual control buttons bar is especially useful when the 2000 Platform
screen is exported on a remote PC.
To display those buttons, click once on the top of the screen in the status
bar, at the same height than the date and time.
Fig. 41 Virtual control buttons bar
The virtual control buttons bar is displayed during a few seconds. You
may click on any of these buttons to obtain exactly the same results than
using the hard keys on the front panel of the 2000 Platform.
The PC keyboard can replaced all the buttons and keys of the 2000 Plat-
O
form except the
N
– The menu keys to the right of the screen are replaced by the func-
F1
tion keys to
– The buttons below the screen are equivalent to
table below).
– The direction keys have the same function on the external keyboard
and on the 2000 Platform.
Function on the 2000 Platform
HOME
SYSTEM SETTINGS
SET-UP
FILE
RESULTS
START/STOP
EXPORT
Menu keys 1 to 6 (from top to bottom)
ABOUT
Save and quit (Exit)
User Manual 790000002/00
Chapter 8 Transferring the 2000 Platform Interface
/O :
button
FF
F6
.
Virtual control buttons bar
Ctrl + a letter (see
External keyboard
Ctrl + H
F12
Ctrl + U
Ctrl + F
Ctrl + R
Ctrl + S
a
Ctrl + P
¬ - ® ¯
F1  F6
F11
Entrée/Enter
67