Starting Up With The Scope; Luminosity And Contrast Settings - JDS Uniphase 2000 Platform User Manual

Starting up with the scope

Luminosity and
Contrast
settings
Once the FiberScope icon is validated:
1 Press R
ESULTS
Fig. 19 Example of the result using the P5000 scope
Luminosity and contrast may be set manually by using the
.
key Bright/Cont . Once you select which parameter you
wish to modify, use the arrow keys
luminosity or contrast to the desired value. Note that the
set values are displayed on the key.
You may also choose to use the function
order to get settings calculated automatically by the instru-
ment.
NOTE
Saturated parts of the picture appear in yellow. Modify the luminosity
and contrast settings or use
ting and remove saturation.
Auto Contrast must be used with a pristine (perfectly clean,
undamaged) fiber connector. Changing the brightness or
contrast settings can significantly change the fiber inspection
test result.
User Manual 790000002/00
hard key
and
Auto contrast
Chapter 6 Scope

Starting up with the scope

to tune the
Auto Contrast in
to modify the actual set-
39