Connection To The Power Meter, Vfl And Talkset; Using The Power Meter - JDS Uniphase 2000 Platform User Manual

Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset

Connection to the power meter, VFL and Talkset

Connection to the power meter, VFL and Talkset

Using the Power meter

Configuring the
power meter
Configuring
measurement
parameters
26
Fig. 12 Optical connectors
The type of optical connector used for the power meter is UPP (Universal
Push Pull), which is compatible with all diameter 2.5 mm connectors (FC,
SC, ST, DIN, E2000, etc.)
Accuracy of measurements
A high degree of accuracy is often required. It is then necessary to
perform a preliminary calibration without the fiber under test to elimi-
nate the losses due to connections as far as this is possible. To do
this, use the «Reference Value» function.
The power meter function is an option chosen at the time of order and
incorporated into the 2000 Platform in the factory.
To activate the function:
H
1 Press the
OME
2 Activate the power meter icon of the Platform
The effect of this action will to be to bring the power meter into use
and to display the Results page for Power Meter.
The measurement parameters can be accessed with the
User Manual 790000002/00
button
Power meter
optical connection
VFL
.
S
key.
ETUP