Sending Files By Bluetooth; Setting Up A Bluetooth Connection - JDS Uniphase 2000 Platform User Manual

Sending files by
Bluetooth
Setting up a
Bluetooth
connection
2 Remove the mini USB plug from the 2000 Platform USB port.
The Bluetooth option allows file transfers between the 2000 Platform and
another device.
1 On the Home page, press System Settings key
2 Under I/O interfaces, select Bluetooth > Enable
The icon is displayed on the upper banner of the screen
3 Push the Bluetooth Pairing menu key
The Paired Bluetooth screen appears
4 Do one of the following:
Press the Become Pairable soft key to wait for another device to
initiate the connection to the 2000.
or
If the desired device is not displayed on the screen, or if no devices
are detected, press the Search Devices soft key.
The 2000 Platform is searching for the devices which could be used
via Bluetooth with the equipment.
REMINDER
You may need to activate bluetooth on the other device to allow
pairing.
A baragraph is displayed during research
Once the research is completed, a list of the available devices is
displayed, with the level of detection of the 2000 Platform.
Fig. 31 List of devices found
User Manual 790000002/00
Working with directories and files from the explorer
Chapter 7 File management
Level of detection
53