Table of Contents
Advertisement
5
6
7
8
9
10 Click on
Upgrading from
This method is used to make a complete reinstallation of the software
versions.
the boot
1
User Manual
Fig. 47
Configuration of the Upgrade Server
In the I/O Interfaces box::
–
On the line Use proxy, select No, Manual or Auto wether a
proxy is used or not.
Once completed, press Exit to return to the Home page.
Press, in succession,
Upgrade > Upgrade via
The message Verify IP address of PC server appears.
Click on Continue.
The list of the software versions available on the PC is displayed
next to the versions installed on the 2000 Platform.
Click on
Show Prev choice
previous and next versions available.
Confirm
or
Click on Confirm All Choices to upgrade all versions.
NOTE
The software versions list does not always appear (cf previous ver-
sions) as well as the
Confirm/Continue
cally.
Upgrading begins. The 2000 Platform is automatically rebooted.
Upgrading takes several minutes. At the end, the 2000 Platform is
automatically restarted.
During the upgrade, the Testing indicator is lit in red. Do not
push any button while the indicator is lit.
Turn off the 2000 Platform using the
equipment connected to the mains.
790000002/00
Chapter 11 Maintenance and Troubleshooting
Expert Tools > Upgrades > Software
Ethernet.
or
Show Next Choice
to start the upgrade of the selected software(s).
Show Previous / Next Choice
key. In this case, the upgrading starts automati-
Maintenance procedure
to display the
buttons and the
O
/O
button, keeping the
N
FF
87
Advertisement
Table of Contents
Troubleshooting
