Table of Contents
Advertisement
Enter Manually the
Licence
Import the license
from the USB
memory stick
To import the license, you can either enter manually the licence code,
given in the license file, (.lic file) or import this file with a USB memory
stick connected to the 2000 Platform.
It is strongly recommended to perform the installation using the
importation of Licence via a USB memory stick.
1
In the Home page, click on Expert Tools > Upgrades > Install
Option > Enter License
The edition keypad is displayed
2
Enter the challenge code of the option, set at the bottom of the file
(see
Figure 48 on page
Fig. 49
Enter the Licence code
The license file can be opened via a word processing software
such as Word...
The challenge code must be entered exactly as it is in the .lic file,
paying attention to the lower-case and upper-case letters etc.
3
Press the Enter key to validate the code
Your software options will be installed
At the end of this sequence you will be asked to reboot the unit to
apply the modifications, pushing the key
to restart the Platform.
1
In the Home page, select the Settings icon
2
In the System Settings page, press Expert Tools > Upgrades >
Install Option > Import License
User Manual
790000002/00
Chapter 11 Maintenance and Troubleshooting
88),
Maintenance procedure
. Confirm the reboot
89
Advertisement
Table of Contents
Troubleshooting
