Table of Contents
Advertisement
Battery
charging time
Battery charge
level display
Switching the 2000 Platform on and off
Switching on
the 2000
Platform
If the battery is completely discharged, the time taken to recharge is:
–
approximately 3.5 hours, if the apparatus is not in use (Charge indi-
cator solid red)
–
about 9.5 hours if the instrument is used during charging (On indi-
cator lit in fix green, Charge indicator lit in solid red).
When the battery is installed in the instrument, a battery icon is displayed
in the top right-hand corner of the screen. Example:
Table 4
Battery icons
The battery capacity is superior to 75%
The battery capacity is set between 50% and 75%
The battery capacity is set between 25% and 50%
The battery capacity is inferior to 25%
The battery capacity is unknown. Perform a full charge/
discharge of the battery to get back to a valid indication.
This icon may appear if battery is changed or if the bat-
tery auto discharges at a very low level (example: if a
Platform switches off as battery is empty, and the charge
is not done during several months (= auto discharge)).
–
When the level becomes too low, the instrument emits a beep ton
inform the user until it switches off automatically after saving the
current configuration and measurement.
O
/O
1
Press the
N
If the Platform is powered to mains, the battery will charge.
The On indicator pass from blinking to solid green.
User Manual
790000002/00
Switching the 2000 Platform on and off
key.
FF
Chapter 3 Starting up
.
17
Advertisement
Table of Contents
Troubleshooting
