Table of Contents
Advertisement
Removing the
Pairing
Creating a screenshot
Configuring the
parameters of
screenshots
Taking a
screenshot
You can also transfer file(s) from the bluetooth device toward the Plat-
form.
In this case, the files received will be stored in a storage media created
automatically on the Platform: bluetooth-inbox.
WARNING
The files stored in bluetooth-inbox will be lost once the 2000
Platform is switched off. Move the files to keep toward another
storage media (disk, usb key...).
1
To remove the pairing between the two equipments, in the System
Settings page, push the Bluetooth Pairing key
2
In the screen displayed, push the Remove pairing key
The icon on the upper banner of the screen becomes
Platform is no more connected to a bluetooth device, but the Bluetooth
option is still active.
To deactivate the bluetooth onto the Platform, go in the System Settings
page, and under I/O Interfaces, select Disable on the Bluetooth line.
You can create captures of what is displayed on the screen, directly from
the 2000 Platform.
To configure the screenshot and choose the format of the generated file:
1
Press H
hard key
OME
2
Select the Settings icon to reach the System Settings page.
3
In the Report box, on the line Mode, select Screenshot
Choosing this option, you can save the displayed screen in JPG,
PNG or PDF format, exactly as it is displayed on the screen.
Therefore, if you make a zoom on the trace for example, the file will
only show the zoom section.
4
On the line File format, select if the printed file will be a JPG, PNG
or PDF file.
Once the screenshot parameters are configured:
1
Reach the display which will be saved as a screenshot in a file.
User Manual
790000002/00
Chapter 7 File management
Creating a screenshot
showing the
55
Advertisement
Table of Contents
Troubleshooting
