Cleaning The Optical Cable Connector; Cleaning The Optical Connections Of The 2000 Platform; Accessing To The 2000 Platform Information; General Page - JDS Uniphase 2000 Platform User Manual

Cleaning the
optical cable
connector
Cleaning the
optical
connections of the
2000 Platform
Accessing to
the 2000
Platform
information

General page

– Use a non-linting type of paper, such as Joseph paper, soaked in
isopropylic alcohol.
– Pay particular attention to the polished face of the fiber, rubbing it in
a direction perpendicular to the axis of the fiber.
– Squirt a highly volatile solvent (such as isopropylic alcohol) into the
connector.
– Blow out the connector using a clean dry air supply from an aerosol
can fitted with an extension.
NOTE
If your module has a universal connector, unscrew its adaptor to
access the ferule.
On the 2000 Platform, some screens allows to display information on
different elements of the equipment.
To display the information on the 2000 Platform
1 On the Home page, validate Settings icon to reach the System
Settings page.
2 On the right menu keys, press About to display the presentation
screen of the 2000 Platform.
The General page is displayed by default, and allows to display the
presentation screen, with all the information concerning the software
versions, the hardware options and the module installed.
Fig. 42 General page
User Manual 790000002/00
Chapter 11 Maintenance and Troubleshooting
Maintenance procedure
81