Table of Contents
Advertisement
Chapter 7 File management
Storage media
Storage media
built into the
2000 Platform
External USB
storage media
USB memory stick
connection
USB memory stick
disconnection
60
The 2000 Platform is delivered with an internal memory , which maximum
capacity is of 1GB (with a minimum of about 128 Mb are available for
data storage).
The 2000 Platform is equipped with 2 USB ports as standard. One of
these can be used to connect an external storage medium, in particular
a USB memory stick.
NOTE
Although two USB ports are present, it is not possible to use simulta-
neously more than one external USB storage medium.
1
Insert the USB memory stick in one of the 2000 Platform's USB port.
A sound is emitted to confirm the successful insertion and recogni-
tion of a USB memory stick.
Then, the icon
user the USB stick is ready to be used.
When a file is moved in the explorer of the Platform, the end of
the move on the screen does not mean that writing of data into
the memory is complete. Some data may still be in a writing
process if the storage unit is removed prematurely.
1
Before disconnecting the USB memory stick, always select a
storage device different from usbflash (select disk for example) in
the explorer.
2
Make sure you no longer have any running applications using the
usbflash storage media.
3
The user must push the
The icon becomes
state, the USB stick cannot be used anymore
The USB memory stick can then be disconnected from the Platform USB
port.
NOTE
The USB memory stick can also be removed using the Expert Tools
> Media Utilities menu, accessible via the System Settings page.
User Manual
790000002/00
is displayed in the upper banner to inform the
E
USB
key, available in File Explorer.
JECT
to indicate it can be removed safely. In this
Advertisement
Table of Contents
Troubleshooting
