Table of Contents
Advertisement
Chapter 11 Maintenance and Troubleshooting
Troubleshooting
Formating the
USB memory
stick onto the
2000 Platform
Erase disk
Touchscreen
calibration
94
If the USB icon
when a USB memory stick is connected to the 2000 Platform, this may
means the memory stick must be formatted.
If the stick needs to be formatted, proceed as follows:
1
Insert the memory stick into one of the USB port on the top of the
2000 Platform.
H
2
Press the
OME
3
Validate the Settings icon to open the System Settings page.
4
On the right menu keys, successively select
utilities
>
Usbflash Format.
5
Confirm your choice to actually format the USB memory stick.
As for any media formatting, please note that all data present on
the USB memory stick will be irremediably lost.
To delete all the disk contents of the 2000 Platform:
1
On the Home page, Press twice the Settings icon to open the
System Settings page
2
Press Expert Tools > Media Utilities,
3
Select Erase Disk to delete all the disk contents into the 2000 Plat-
form.
A confirmation must be validated before the deletion.
If you meet problems when using the touchscreen (example: pressing on
an icon does not work correctly...) a calibration can be performed on the
2000 Platform touchscreen.
To calibrate the touchscreen, proceed as follows:
H
1
Push the
OME
2
Press twice the Settings icon to open the System Settings page.
3
Press Expert Tools menu key
4
Press
Touchscreen Calibration
A blue slightly smaller screen appears, displaying a little target on
the left hand corner .
5
Click on this target (preferably with the touchscreen pen).
6
A new target appears then and again, for a total of 4 times, in order
to click on all corners of the screen.
User Manual
790000002/00
is displayed on the upper banner of the screen,
button
button
key
Expert tools
>
Media
Advertisement
Table of Contents
Troubleshooting
