Defining The Screen Parameters Of The 2000 Platform; Backlight; Contrast; Screen Saver - JDS Uniphase 2000 Platform User Manual

Defining the screen parameters of the 2000 Platform

Backlight

Contrast

Screen Saver

In the System Settings page, the following parameters can be defined:
1 Click on Backlight
2 Define the backlight level of the screen, using the left and right
direction keys, or clicking on Edit Number softkey and using the
keypad displayed.
– Min backlight level: -5
– Max backlight level: +5
If the 2000 Platform is operating on battery, it is advisable to
choose a minimum lighting level, acceptable for the user, to keep
endurance as long as possible.
1 Click on Contrast
2 Select the type of environment into which the instrument is used:
– Indoor: to be selected when the instrument is used inside (see
Figure 10 on page
– Outdoor: to be selected in order to optimize the readability of
the screen for an outside use.
Fig. 11 Example of outdoor contrast
Click on Screen Save if you wish to activate a screen saver to the equip-
ment, to extend the life of the battery, in case the 2000 Platform is not
used for some time.
Instead of the normal screen, a small animated picture of the 2000 Plat-
form is displayed on the blackened screen.
User Manual 790000002/00
Chapter 4 Configuring the 2000 Platform
Defining the screen parameters of the 2000 Platform
22)
23