Transferring The Interface - JDS Uniphase 2000 Platform User Manual

Chapter 8 Transferring the 2000 Platform Interface

Transferring the Interface

Transferring the Interface
Click to install TightVNC software
on your PC (not mandatory)
66
Once the connection is established between the 2000 Platform and the
PC, proceed as follow:
1 Open Internet Explorer on the PC.
2 Considering 10.33.18.93 is the IP Address of the 2000 Platform
(as shown Figure 39 on page
Internet Explorer window:
http://10.33.18.93:5800
3 Press Enter to validate.
A VNC window opens, demanding a
password
4 Press OK without typing any password.
The screen of the 2000 Platform appears offset on your PC.
Fig. 40 VNC window
You can use keyboard mouse of the PC to control the 2000 Platform (see
"Equivalence between the keyboard and 2000 Platform" on page
NOTE
Once Remote screen is accessbile via VNC, the icon
on the upper banner of the screen until the connection is cut or the
2000 Platform is switched off.
User Manual 790000002/00
65), enter the following address in the
67).
displays