Table of Contents
Advertisement
Chapter 6 Scope
Launching a test of the connector and fiber end-face
Mosaic Mode
Position 1 :
L
Position 3 :
Connector before
being cleaned
42
It is possible to display only one picture in full screen (640 * 390 pixels)
or up to four pictures (320*180 pixels each, including the live camera
picture) in mosaic mode. Use the key
one mode to another.
IVE CAMERA
Fig. 21
–
You may select one of the pictures by clicking on it.
The selected picture is framed in green.
The toolbar on the right varies according to which picture is selected
(camera, or static picture):
Picture selected: Camera
All the Contrast and Luminosity settings are available just like in full
screen.
Snapshot
The live picture from the camera is frozen but does not
replace the live picture at position 1. The new snapshot
is placed at the second position, and all existing pictures
are pushed to the next position.
If all positions were taken, the picture that was once at the fourth posi-
tion is unloaded from memory. Frozen pictures and snapshots are
lost, unless they were saved on the internal memory.
User Manual
Position 2:
Snapshot saved on disk : connector cleaned
Position 4 : Regular JPEG image
Mosaic mode
790000002/00
Full scr./Mosaic
to switch from
Selected picture
Advertisement
Table of Contents
Troubleshooting
