Adjusting Volume Level; Disconnection - JDS Uniphase 2000 Platform User Manual

Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset
Talkset Function
Adjusting
volume level

Disconnection

34
– If the remote instrument is ready to receive (on standby), the Talkset
icon turns orange, beeps are emitted, and the icon
the top of the screen: telephone communication can now take place.
– If the remote instrument is not ready to receive, the Talkset icon
does not change color and a message is emitted.
NOTE
The talkset icon is displayed on the top banner as long as communi-
cation remains established, letting the user know that the connection
is working.
When communication is established, the headset is automatically
enabled if plugged in. However, the loud speaker must be correctly
configured in the setup menu to work accordingly
The sound is transmitted to the earphones of the headset and, if this
function has been activated, to the speaker in the 2000 Platform base. To
activate the base loudspeaker and adjust the volume:
H
1 Press the
OME
2 Validate Settings icon to reach the System Settings page.
3 Under the Audio box, select Headset Volume and adjust the
volume.
When communication is over, deactivate the Talkset function on the
2000 Platform. This deactivation can be done by either 2000 Platform.
Then, the fiber used for Talkset, can be disconnected from each Platform
safely.
User Manual 790000002/00
key.
appears at