Storing And Reloading Results; File Setup; Storing Results; Loading Results - JDS Uniphase 2000 Platform User Manual

Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset

Storing and reloading results

Storing and reloading results

File Setup

Storing results

Loading results

32
NOTE
Identification is facilitated by the blinking of light in the fiber.
To emit a light signal into a fiber:
1 Connect the fiber to the VFL port on the connectors panel.
H
2 Press the
OME
The icons
The signal mode of the VFL can be modified in the System Settings
page, in Utility > VFL Mode parameter.
Click on the button
management» in the user manual «2100 modules series» for a complete
description of all parameters, options and description of the explorer.
In order to save the results of a measurement, click on
Store trace. Two files are being saved :
– The first file is used with the 2000 Platform and allows to retrieve all
measurement results. It is saved with the extension «.Lts».
– The second file is a ASCII file using tabulations to separate values.
It is saved with the extension «.txt» and can be opened by the 2000
Platform. It has been designed to be used with a spreadsheet
program on a PC where it allows to retrieve all measurement results
and format them in a nice customized table.
In order to load the results of a measurement, select a file
extension «.Lts» in the file explorer (see the chapter «File management»
in the user manual for «2100 modules series»), click on
Confirm Load.
The LTS tab is displayed with the loaded results in the table
User Manual 790000002/00
key and activate the VFL
display on the upper banner of the screen.
F
to access the File
ILE
setup. See the chapter «File
F
and select
ILE
Load
with the
then