Table of Contents
Advertisement
Chapter 11 Maintenance and Troubleshooting
Maintenance procedure
Installing a new
version of the
software
Downloading from
Internet
Installation from a
USB memory stick
84
When a new software version is loaded, there is a risk of re-initializa-
tion of the internal memory. Before installing the new software, it is
therefore advisable to save the results in the memory, using the
function called up by the
Do not interrupt the installation process, as this could damage the
instrument.
To avoid any interruption of the installation procedure, the 2000 Plat-
form must be operating on the mains: if the procedure is started while
operating on battery, a message indicates that the instrument must be
connected to the mains.
When the software is obtained from the Internet, it must be saved on a
storage medium before the software upgrade of the product can be
carried out. To do this:
1
Open Internet Explorer
2
On the JDSU web site
product concerned
–
MTS 2000 Multiple Services Test Platform
or
–
T-BERD 2000 Multiple Services Test Platform
3
Click on the tab Downloads.
4
Click on the link 2000 Firmware Update
A new page opens, displaying the current version available and
several links.
5
Click on the icon
6
In the new dialog box displayed, click on Save to save the exe file
on the PC.
7
Once completed, connect the USB memory stick to the PC and
follow the instructions chapter
stick" on page
84, from
You must be equipped with a USB memory stick with a minimum capacity
of 128 Mo.
User Manual
790000002/00
F
button.
ILE
(http://www.jdsu.com),
or on the exe file to load the archive.
"Installation from a USB memory
step
2.
Save
open the page of the
Advertisement
Table of Contents
Troubleshooting
