Table of Contents
Advertisement
Chapter 3 Starting up
Charging the battery
Charging the battery
Connecting the
mains adapter
First use of the
battery
Charging the
battery
16
1
Set the appropriate adaptable plug to the power supply cable,
according to your country (see
2
At the right side of the 2000 Platform, lift up the power supply socket
protector and plug in the mains adapter.
3
Connect the adapter to the mains.
The
On
indicator lamp starts to blink in green.
Use only the mains adapter supplied with the 2000 Platform. The
adapter for some other electronic device may appear to be
identical, but entails a risk of damage to the 2000 Platform.
At the delivery, the battery is already set into the Platform, but its charge
level is not «recognized» by the equipment.
The icon
is displayed on the upper banner of the screen.
To get a valid indication of the battery, and be able to use correctly the
Platform:
1
Charge fully the battery
2
Once fully charged, discharge the battery by keeping the Platform
switched on, but not plugged to mains.
3
The battery can then be charged, and the Platform used simultane-
ously.
On connection to the mains:
–
if the user does not press
case, the Charge indicator will be lit in red.
–
when the user presses the
battery will charge during use (Charge indicator in solid red).
Once the battery is fully charged, the Charge indicator is lit in solid green.
When the Charge indicator is blinking red, this mean the power supply is
not compatible with the battery used. Charge is disabled.
It is essential to wait until charging is complete to ensure
maximum independent operating time, which may otherwise be
considerably reduced.
User Manual
790000002/00
page
15).
O
, the battery will start the charge. In this
N
O
key, the instrument starts up and the
N
Advertisement
Table of Contents
Troubleshooting
