Chapter 11 Maintenance and Troubleshooting
Maintenance procedure
Locking the
2000 Platform
90
If the USB memory stick is not already connected to the Platform, a
message asking the memory stick insertion is displayed. Confirm it
once the stick is connected.
3
In the File Explorer, select the USB stick, then the license file (.lic) to
be imported,
4
Click on Load > Confirm
5
The challenge codes contained in this file will then be loaded auto-
matically and your software options will be installed.
Fig. 50
License imported
6
At the end of this sequence you will be asked to reboot the unit to
apply the modifications, pushing the key
7
Confirm the reboot
The 2000 Platform can be locked at any time:
H
1
In the
page, click on Expert Tools
OME
2
Click on Instrument Lock Out
3
Confirm the 2000 Platform locking by clicking on Confirm (or use
the Cancel key to cancel the process).
The numeric keypad is displayed
4
Entrer the password to lock the instrument: 42000 with the numeric
keypad displayed.
User Manual
790000002/00
.