Table of Contents
Advertisement
M34286T2-CPE User's Manual
3. Usage (How to Use the Emulator Debugger)
This chapter describes how to start up the emulator debugger and how to use the main windows.
3.1 Starting Up the Emulator Debugger (Init Dialog Box)
To launch the emulator debugger, click the Start menu of Windows and then select Programs >> RENESAS-TOOLS
>> PD72M V.xx.xx Release x >> PD72M. When the emulator debugger started up, the Init dialog box appears.
When the emulator debugger started up, the Init dialog box appears.
(1) Setting the Init dialog box (1/2)
R20UT0214EJ0200 Rev.2.00
Sep 16, 2010
3. Usage (How to Use the Emulator Debugger)
Serial No.
Shows the currently connected emulators in list form. Select
the serial No. of the emulator you want to be connected.
Automatic execution of script commands
To automatically execute a script command when starting up
the debugger, click the "Refer..." button and specify the script
file to be executed.
Clicking the "Refer..." button brings up a file selection dialog
box. The script file you have selected is displayed in the Init
File: section of the dialog box shown here. If you do not want
to automatically execute a script command, delete the character
string displayed in the Init File: section of the dialog box.
What you specify here is reflected at only startup. If you
specify back again in the Init dialog box after startup, whatever
you specified has no effect. (Be sure to restart the emulator
debugger.)
Redownloading the load module
To download the load module (user program) again, select the
"AutoDownLoad" check box. (By default, it is unselected)
Restoring the last window state
To restart the state of the window in which it was when it was
finished previously (e.g., window position and size), select the
"Resume" check box (flagged by a check mark when selected).
(By default, it is selected)
Page 39 of 70
Advertisement
Table of Contents
