Table of Contents
Advertisement
M3028BT2-CPE User's Manual
3. Usage (How to Use the Emulator Debugger)
3. Usage (How to Use the Emulator Debugger)
This chapter describes how to start up the emulator debugger and how to use the major windows.
3.1 Starting Up the Emulator Debugger
When debugging the completed programs, switch the session. The session can be changed by the drop down list of the tool bar
shown below.
You will have as many sessions created as the number of targets you selected when creating a project, so select the session that
corresponds to the target to be connected from the drop-down list. To connect to the M16C/Tiny Compact Emulator, select
"SessionM16C_R8C_Compact_Emulator"
REJ10J1457-0300 Rev.3.00 July 22, 2009
Page 43 of 90
Advertisement
Table of Contents
