Table of Contents
Advertisement
3. Select Install the software automatically (Recommended) and
click Next.
When Windows XP completes the driver installation for the
selected device (see step 1), a window shown in
appears on the screen.
Figure 1-11. Windows XP – Completing Driver Installation
4. Verify the installation by following the instructions in
Driver
Installation".
Verifying Driver Installation
Before you use the EZ-KIT Lite evaluation system, verify that the USB
driver software is installed properly:
1. Ensure that the USB cable is connected to the evaluation board and
the PC.
ADSP-2191 EZ-KIT Lite Evaluation System Manual
Getting Started
Figure 1-11
"Verifying
1-15
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSP-2191 EZ-KIT Lite and is the answer not in the manual?
Questions and answers