Ez-Kit Lite Hardware Reference - Analog Devices ADSP-2191 EZ-KIT Lite Manual

3 EZ-KIT LITE HARDWARE
REFERENCE
This chapter describes the hardware design of the ADSP-2191 EZ-KIT
Lite board. The following topics are covered.
• "System Architecture" on page 3-2
Describes the configuration of the ADSP-2191 EZ-KIT Lite board
and explains how the board components interface with the
processor.
• "Jumper and DIP Switch Settings" on page 3-6
Shows the location and describes the function of the configuration
jumpers and the clock multiplication factor selection switch.
• "LEDs and Push Buttons" on page 3-11
Shows the location and describes the function of the LEDs and
push buttons.
• "Connectors" on page 3-14
Shows the location and gives the part number for all the connec-
tors on the board. Also, the manufacturer and part number
information is given for the mating parts.
• "Specifications" on page 3-18
Gives the requirements for powering the board as well as the
mechanical locations of some components of the board.
ADSP-2191 EZ-KIT Lite Evaluation System Manual 3-1