Sport0 (P6) And Sport1 (P7); Jtag (P8) - Analog Devices ADSP-2191 EZ-KIT Lite Manual

Connectors

SPORT0 (P6) and SPORT1 (P7)

and
SPORT0 SPORT1
Table 3-7. SPORT Connectors
Part Description
20 position AMPMODU system
50 receptacle
20 position AMPMODU system
20 connector
20 position AMPMODU system
20 connector (without lock)
Flexible film contacts (20 per
connector)
Straight-through assembly with
locking connector on each end

JTAG (P8)

The JTAG header is the connecting point for a JTAG in-circuit emulator
pod. When an emulator is connected to the JTAG header, the USB debug
interface is disabled.
!
Pin 3 is missing to provide keying. Pin 3 in the mating connector
should have a plug.
!
When using an emulator with the EZ-KIT Lite board, follow the
connection instructions provided with the emulator.
3-16
are each connected to a 20-pin connector.
Manufacturer
AMP
Mating Connectors
AMP
AMP
AMP
Mating Assembly
Gopher Electronics
ADSP-2191 EZ-KIT Lite Evaluation System Manual
Part Number
104069-1
2-487937-0
2-487938-0
487547-1
DRFFC10X7RHU-RHU5