Windows 2000 Usb Driver Installation - Analog Devices ADSP-2191 EZ-KIT Lite Manual

Installation Tasks
11. Click OK.
The driver installation is complete, as shown in
Figure 1-9. Windows 98 – Completing Software Installation
12. Click Finish to exit the wizard.
13.Verify the installation by following the instructions in
Driver Installation" on page

Windows 2000 USB Driver Installation

VisualDSP++ 3.5 installation software pre-installs the necessary drivers for
the selected EZ-KIT Lite. The install also upgrades an older driver if such
is detected in the system.
#
Prior to running the VisualDSP++ 3.5 installer, ensure no other
Hardware Wizard windows are running in the background. If any
wizard windows are running, close them before starting the
installer.
1-12
1-15.
ADSP-2191 EZ-KIT Lite Evaluation System Manual
Figure 1-9.
"Verifying