Verifying Driver Installation - Analog Devices ADSP-21262 EZ-KIT Lite Manual

Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
When Windows XP completes the driver installation for the
selected device (see step 1), a window shown in
appears on the screen.
Figure 1-11. Windows XP – Completing Driver Installation
4. Verify the installation by following the instructions in
Driver Installation".

Verifying Driver Installation

Before launching the EZ-KIT Lite evaluation system, verify that the USB
driver software is installed properly:
1. Ensure that the USB cable connects to the evaluation board and
the PC.
2. Verify that the yellow USB monitor LED (
fies that the board is communicating properly with the host PC
and is ready to run VisualDSP++.
ADSP-21262 EZ-KIT Lite Evaluation System Manual
Getting Started
Figure 1-11
"Verifying
) is lit. This signi-
LED11
1-15