Table of Contents
Advertisement
Installation Tasks
When Windows XP completes the driver installation for the
selected device (see step 1), a window shown in
appears on the screen.
Figure 1-11. Windows XP – Completing Driver Installation
4. Verify the installation by following the instructions in
Driver
Installation".
Verifying Driver Installation
Before launching the EZ-KIT Lite evaluation system, verify that the USB
driver software is installed properly:
1. Ensure that the USB cable connects to the evaluation board and
the PC.
2. Verify that the yellow USB monitor LED (
fies the board is communicating properly with the host PC and is
ready to run VisualDSP++.
1-14
ADSP-21160 EZ-KIT Lite Evaluation System Manual
Figure 1-11
"Verifying
) is lit. This signi-
LED5
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSP-21160 EZ-KIT Lite and is the answer not in the manual?
Questions and answers