Default Settings In Standby Setup - Dräger Fabius Instructions For Use Manual

Default Settings in Standby Setup

Select and confirm the »Default Settings«
label on the Standby Setup screen. (Selecting
and confirming the return arrow will exit the
Default Settings column and redisplay the main
Setup screen.)
The following settings are available under Default
Settings:
– »Volume Settings«
– »Pressure Settings«
– »Pressure Support Settings«
– »SIMV/PS Settings«
– »Alarm Limits«
– »Alarm Volume«
– »Restore Factory Defaults«
Volume Settings
Select and confirm the »Volume Settings«
label on the Standby Setup screen. The Default
Volume Settings window appears at the bottom
of the screen.
Instructions for Use Fabius MRI SW 3.n
Configuration
141