Care List For Fabius Mri Components - Dräger Fabius Instructions For Use Manual

Cleaning

Care List for Fabius MRI Components

The following table lists Fabius MRI components
with recommended processing methods. Process-
ing refers to cleaning, disinfection, and/or steriliza-
tion, as appropriate for a given component. The
table is intended as a guide. Follow the institution's
policies regarding specific methods and agents for
cleaning and sterilization.
CAUTION
Fabius MRI and its components must not be trea-
ted with formaldehyde vapors or ethylene oxide.
Fabius MRI
components which
can be reprocessed
Surfaces
Device surfaces
Power supply cable,
pressure gas hoses
Respiratory pressure
meter
Components for carrying breathing gas
Breathing system
Inspiratory valve,
Expiratory valve, APL
valve
Expiratory port
Exhaust port valve
Ventilator cover
7)
Ventilator diaphragm
Ventilator hose
Absorber and insert
Infinity ID/Spirolog/
SpiroLife flow sensor
Manual bag valve
mask holder
176
Recommen- Manual pre-
ded cleaning
reprocessing
intervals
Per patient No
Per patient No
Daily No
Per patient Yes
6)
Per patient Yes
Per patient Yes
6)
Per patient Yes
6)
Per patient Yes
Per patient Yes
Per patient No
Per patient Yes
Note the Instructions for Use of the flow sensors
Per patient Yes
Applicable for non-infectious patients
CAUTION
For infectious patients, all parts that come into
contact with breathing gas also have to be sterili-
zed after disinfection and cleaning.
The list is only intended as a rough guideline. The
instructions of the hospital´s hygiene officer shall
prevail and must be observed!
Machine Manual disinfection
1)
cleaning and
Surface
thermal
disinfection
2)
disinfection
No Yes
No Yes
No Yes
5)
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
5)
Yes No
Yes No
Yes No
Instructions for Use Fabius MRI SW 3.n
3)
Hot steam
sterili-
Immersio
zation
n bath
disinfec-
tion
4)
No No
4)
No No
No No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes