Onboard Your Phone With Activation Code; Set A Password On Initial Phone Boot Up; Your Phone - Cisco 6800 Series User Manual

Your Phone

Step 2
Press Continue.
Note
The phone completes the provisioning process automatically.
Step 3
If an error message displays, enter the code again or contact your administrator.

Onboard Your Phone with Activation Code

After your phone boots up, you will see a welcome screen where you can enter the activation code. If you
don't have an activation code, contact your administrator.
Note
Before you begin
Your administrator provides you with a 16-digit activation code in the form xxxx-xxxx-xxxx-xxxx.
Procedure
Step 1
Enter your activation code in the field that is provided on the Welcome screen. You don't need to input the
hyphen (-) character when entering the code.
Step 2 Press Continue.
Note
The phone completes the onboarding process automatically.
Step 3
If an error message displays, enter the code again or contact your administrator for a new code.

Set a Password on Initial Phone Boot Up

The first time your phone boots up, you may be prompted to set a password. If you are not prompted, your
administrator has created a password for you.
Procedure
Step 1
Enter your password in the New password and Reenter new password fields.
The Continue softkey doesn't appear until you enter first three digits of the valid activation code
followed by a # key. The Delete softkey appears only when you enter the first digit of activation
code in the Enter activation code box.
The Cisco IP Phone 6861 Multiplatform Phones don't support onboarding with activation code.
The Continue softkey appears only when you enter either valid 16-digit activation code or the
valid first three digits of it followed by a # key. The Delete softkey appears only when you enter
the first digit of the activation code in the Enter activation code box.
Onboard Your Phone with Activation Code
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
17