Activate Your Phone Manually; Re-Enter Your Phone Activation Code - Cisco IP Phone 7800 Series User Manual

Activate Your Phone Manually

Procedure
Step 1
Make the QR code ready with one of these methods:
• Print the email with the QR code and hold the paper in front of the phone camera.
• Display the QR code on your mobile device and hold the device in front of the phone camera.
• Display the QR code on your computer and hold the phone in front of the computer screen.
Step 2
Turn the ring around the camera clockwise to open the shutter.
Step 3 Scan the QR code.
When the scan succeeds, your phone registers with the server, and you're ready to make your first call.
Activate Your Phone Manually
If your phone does not have a camera, enter the code on the phone screen to activate it.
You can also press Enter manually to enter the code manually instead of scanning the QR code.
Before you begin
You need the QR code from your welcome message.
If the code from your welcome message has expired, generate an activation code for your device with
Webex
Procedure
Step 1 Enter your activation code.
Step 2
Press Continue.
Your phone registers with the server, and you're ready to make your first call.

Re-enter Your Phone Activation Code

If you ever need to re-enter the activation code for your phone, generate a new code and reset the service
mode settings on the phone. After you reset these settings, your phone will restart and prompt you to enter
the activation code.
Procedure
Step 1
Do one of the following actions:
• Desk phones—Press Applications
• Conference phone—Press Settings.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
6
Settings.
Activate Your Phone
Cisco